1、Determination of Preheating Temperature of Hot Extrusion Punch
熱擠壓凸模預熱溫度確定

2、The key of the technology was designing ideal process by using suitable preheating method.
該技術的關鍵是采用合理的預熱方式，設計出理想的工藝流程。

3、Batch and cullet preheating systems: using furnace waste gases.
配料和碎玻璃預熱系統(tǒng)：采用窯爐廢氣熱能。

4、Preheating temperature shall be kept uniform from the start to the end of welding.
預熱溫度在焊接開始到結束期間應保持均衡。

5、A Study of Preheating Process for CMT Manufacture
GMT片材制備過程中預熱過程的研究

6、The thick copper layers absorb a lot of heat from the preheating and liquidus solder.
多層的厚銅板吸收很多來自預熱和液化焊錫的熱能。

7、Consteel EAF and Preheating of Scrap
康斯迪電爐與廢鋼預熱

8、Preheating process is very important because it affects machining quality directly.
預熱效果直接對加工質量產生很大的影響。

9、The processes of preheating and welding of super scale penstocks were detailed.
本文詳細敘述了巨型壓力鋼管的預熱裝配和焊接過程。

10、Proper selection of materials, preheating and postheating can help to avoid cracking.
適當的選材與低溫預熱及后熱可以抑制表面裂紋的產生。

11、Condensate from the first-effect calandria is used for preheating the feed.
一效列管換熱器中出來的冷凝液被用來預熱進料。

12、INFLUENCE OF PREHEATING ON CWS COMBUSTION
水煤漿預熱對燃燒的影響

13、For large work pieces preheating is recommended.
用于大焊件時建議預熱。

14、Preheating is required if either of these two conditions are not met.
如無法滿足兩個條件中任意一條，則需要進行預熱處理。

preheating翻譯