1、There are three main operations in the heat treatment of steel: hardening tempering and annealing.
鋼的熱處理操作主要有三種，即：淬火、回火和退火。

2、The activity of heat treatment catalysts was higher than that of the unheated one.
熱處理催化劑的活性比未熱處理的高。

3、Hot treatment: vacuum, carburizing, nitriding, vacuum heat treatment and cryogenic treatment etc.
熱處理：真空，滲碳，滲氮，真空熱處理，超低溫處理等。

4、Material oxidation, such as oxidation spot, serious after heat treatment of oxide film.
素材氧化嚴重，如氧化斑，熱處理后氧化膜。

5、Fast cooling in heat treatment can decrease magnetic flux density.
快速冷卻可降低鋼的磁通密度。

6、With strong heat treatment and processing capacity.
具有較強熱處理及加工能力。

7、A Roadmap of Heat Treatment Technology Development in USA
美國熱處理技術發展路線圖概述

8、Finally on tool steel alloying and heat treatment quality control problems were introduced.
最后對工具鋼合金化及熱處理質量控制問題進行了介紹。

9、Rotors undergo special heat treatment to increase stiffness.
轉軸經過特殊熱處理增加剛性。

10、The heat treatment has a little effect on the polycondensation of DL-lactic acid.
后期的熱處理對促進DL -乳酸的縮聚反應作用不明顯。

11、The parts for heat treatment must be clean and degreasing treatment is requirement if necessary;
熱處理部件必須清潔，如果有必要應進行脫脂處理；

12、HEAT TREATMENT OF Hg_o.8Cd_0.2Te AT 600°C IN A CLOSED SYSTEM
在600℃封閉系統中Hg_(0.8)Cd_(0.2)Te的熱處理

13、Heat treatment shall consist of normalizing normalizing and tempering or quenching and tempering.
熱處理包括正火、正火和回火或者淬火和回火。

14、The procedures of heat treatment of steel include hardening tempering annealing and case hardening.
鋼的熱處理工序包括硬化、回火、退火和表面硬化。

15、In this subject, gluten was modified by both wet heat treatment and succinic anhydride acylation.
本文主要研究了濕熱—琥珀酸酐?；瘜π←溍娼畹鞍走M(jìn)行復合改性。

16、Materials and Heat Treatment Process of Pick in 6LS Cong Wall Shearer
6LS型采煤機截齒材料和工藝的改進

17、The product is cubic antimony trioxide after heat treatment in vacuum.
經真空干燥處理后，產品為立方晶型的銻白。

18、HEAT TREATMENT OF Hg_o8Cd_02Te AT 600°C IN A CLOSED SYSTEM
在600℃封閉系統中Hg_(08)Cd_(02)Te的熱處理

19、Effect of Heat Treatment on Resistance to Thermal Shock of Ni—Al Coating
熱處理對Ni-Al涂層耐熱沖擊性能的影響

20、Improvement of heat treatment of boots in MG300/700-WDcoal-winning machine
MG300/700-WD采煤機滑靴熱處理工藝的改進

21、Application of YF Technique to Heat Treatment of Prestressed Work-Clip
YF技術在預應力工作夾片熱處理中的應用

22、Heat treatment technology of EQ-140 breaking-foot
EQ-140制動蹄熱處理工藝

23、Perhaps in greatest measure this applies to the heat treatment of tool steel.
也許在最好的尺寸中這適用于工具鋼的熱處理。

24、How many operations are there in the heat treatment of steel ?
鋼的熱處理有多少種操作方法?

25、Heat Treatment of W6Mo5Cr4V2 Steel Cold-punching Die
W6Mo5Cr4V2鋼冷沖模(沖釘)的熱處理

26、Then, if needed, the pipe undergoes heat treatment or just goes to the quality testing line.
然后，如果有需要，這些管子將經過熱處理或者直接進入質量測試環節。

27、The Controlled Atmosphere Heat Treatment of Metallic Card Clothings
金屬針布的可控氣氛熱處理

28、The film goes on with a purple hue but after the heat treatment appears clear.
這種涂層會呈現出一種紫色，但在烘烤之后看上去就是清晰透明了。

29、The Effect of Heat Treatment on Microstructure of a Cast TiAl Alloy
熱處理對TiAl基鑄造合金組織形態的影響

30、A STUDY OF THE HEAT TREATMENT OF CVD Nb_3Sn SUPERCONDUCTING TAPES
CVD Nb_3Sn超導帶熱處理的研究

heat treatment翻譯