1、If jack screws cannot be used than angled slots need to be installed for pry bar access.
如果不能使用起吊螺絲孔，應在入子上作撬模桿進入的斜槽。

2、You want to use a pry bar to protect your wall once you start laying the last of the boards.
你想用撬桿，以保護你的圍墻一旦開始鋪設最后的議會。

3、Wear may sometimes be detected by using a small pry bar under the joint.
有時，在接頭處用一個小杠桿就能檢測出耐用性。