1、The effect of condensation reflux model in PWR LOCA analyses was investigated.
研究了冷凝回流在壓水堆中破口失水事故中的作用。

2、The nuclear reactor coolant pump is one of the core equipments in PWR nuclear Power Plant.
核主泵是壓水型反應堆核電站中的核心設備之一。

3、ANALYSIS AND CALCULATION OF PWR UPPER PLENUM FLOW FIELD
壓水堆上腔室流場的分析和計算

4、This paper described benchmark test noise signal analysis of PWR and gets some useful results.
本文介紹了壓水堆噪聲基準試驗信號分析，并從中得出一些有用的結果。

5、Conceptual Design of NSSS for 1000MW PWR Nuclear Power Plant of China
自主化1000MW級壓水堆核電站核蒸汽供應系統概念設計

6、Now in a PWR we have essentially boron to control reactivity.
在一個壓水式反應堆里，我們用硼來控制反應率。

7、The application of MOX fuel in China's PWR is discussed in the end.
探討了MOX燃料在國內壓水堆核電站中的應用問題。

8、The Design of the DCS Remote I/O Station in PWR NPP
壓水堆核電站儀控DCS遠程I/O站的設計

9、Westinghouse Next Generation of PWR Fuel Design——VANTAGE5
威斯汀豪斯電氣公司新一代壓水堆燃料組件設計——VANTAGE5

10、Discussion of Eu Number in PWR Hydraulic Simulation
壓水堆水力?；蠩u數的討論

11、Design and Test of Westinghouse PWR Steam Generators
西屋公司壓水堆核電站蒸汽發生器的設計與試驗

12、ERP-IV-A PROGRAM FOR TRANSIENT THERMAL-HYDRAULIC ANALYSIS OF PWR PLANT
ERP-Ⅳ熱工水力瞬態分析程序

13、The hybrid breeders can provide plenty of fissile material for PWR or FBR.
聚變-裂變混合堆可以為壓水堆或快堆提供充足的核燃料。

14、3—D NODAL ANALYSIS OF BURN—UP PHYSICS FOR 300 MW_e PWR POWER STATION
300MW_e核電站壓水堆燃耗物理的三維節塊分析

15、Start-up of 1000MW Class PWR Plants
1000MW級壓水堆電站啟動

16、RESEARCH ON PHYSICAL PROPERTIES OF PWR CORE FOR MIXED FUEL (UO 2 +ThO 2)
壓水堆中使用均勻混合型鈾-釷燃料(UO_2+ThO_2)的堆芯物理特性研究

17、The Electric Costs Analysis of 1000MW and 600MW PWR Nuclear Power Plant
1000MW和600MW壓水堆核電站的電力成本分析

18、The paper presents the developing tendency of PWR NPP briefly.
文中簡要介紹了國外壓水堆核電站的發展趨勢。

19、Presented is a model for the multi region and variable node PWR core.
建立了多區變節點壓水堆堆芯的數學物理模型。

20、In a PWR the pressure of the water is about two thousand pounds which prevents boiling in the core.
在壓水式反應堆中，水的壓力則是，2000磅，這避免了水在核心處沸騰。